When it comes to companies that know a thing or two about shower drains, Oatey is definitely a name worth paying attention to. If you are planning to install one of their shower drains, keep in mind that you are taking advantage of something with a great reputation behind it. When properly installed, an Oatey shower drain is something that can be used for years and years to come.
In order to ensure the drain is properly installed, there are a number of elements to the installation process that you are going to want to keep in mind.
Tips To Install An Oatey Shower Drain
In terms of learning how to install Oatey shower drain, there are a few important things to remember. In the first place, take an assessment of your experience level with DIY plumbing projects. If you decide to go forward with installing the shower drain, use DIY/How-To videos that can be found on YouTube and elsewhere. Videos can provide you with a clear visual of your parts, the tools you’re going to need, and how things should look as you’re moving from one step in the installation process to another.
You will also want to keep the following things in mind:
• Remember that your drain comes with 2 washers. These are a fiber washer, in addition to a rubber washer.
• If you have to install the drain with a fiberglass shower stall base, don’t worry. All you really need to do is keep in mind the order of installation. There is also the question of whether or not putty is appropriate to use in this situation.
• To address the issues mentioned above, there are a few simple things you will want to do. You will want to begin by putting silicone under your strainer flanage.
• Your next step will be to insert the strainer into the “inside hole” of your shower base.
• From the bottom, begin installing the rubber washer against your shower base. The cardboard friction washer is going to be next, and this is going to be followed by the nut.
• Remember that the nuts have a habit of coming loose, and they aren’t always going to be accessible after the installation has been completed. Your best bet in this situation is going to be to use a brass strainer. Barring that, you are going to want to use a pipe sealant on your threads. This ensures they will be properly tightened.