Did you ever go to get a shower or wash your dishes only to find the water was cold? When you are using an electric water heater to heat your water, you will run into a different set of problems than you will experience when you use gas or propane, but one of the biggest problems is tripping the sensor that tells you that you have gotten the water too hot. This can be an issue because it won’t just stop heating, but shut down the processes of the water heater because this can be a larger issue. However, most of the time, this is just a glitch in the system that is easy to fix.
Do You Have a Defective Thermostat?
The thermostat on your water heater is the part that tells the system when to heat and when to let the water sit and wait. If there is a problem with the thermostat, then you will have the water heating constantly and this will, of course, trigger the shut-off switch because you do not want the water getting too hot.
Is The Heating Element Shorted Out?
In an electric water heater, you have one or more heating elements that provide heat that will raise the temperature of the water in your water heater. Sometimes there are issues with those elements that can either keep the element from heating up enough or heating too much. This is a simple fix if it is the problem.
The sensor switch may be defective. While the sensor switch is there to keep your electric water heater running smoothly, it is possible that it has stopped functioning correctly. If that is the case you will need to replace it.
Get The Help That You Need If You Are Experiencing Problems With Your Electric Water Heater.
While there are many tutorials on the internet as well as ways that you can fix your own issues, you will want to make sure that you get the right advice and assistance when you are working on your own water heater. Make sure to take safety precautions such as turning off the breaker switch to avoid any electrical shocks while you are working. With the right tools and advice, you can make sure that your electric water heater is running smoothly and efficiently every time that you want to use it.