The existence of black mold in the household can be very frustrating to see, particularly in the shower area. Therefore, it is very important to get rid of this menace in the shower as soon as possible to avoid build up. Nevertheless, chemicals that can be used to handle this situation can be pretty toxic to use inside the house. Proper care is indeed essential when using certain types of chemicals. Here are some basic steps that you can follow when you are faced with the same dilemma.

1. Cleaning Black Mold with Ammonia

It is very important to know that ammonia can be an effective tool to clean up black mold in the shower. Basically, it’s a good disinfectant and excellent in killing black mold on non-porous or hard items, such as shower doors, bathroom sinks, and kitchen counters.

Mix water and ammonia on a 50/50 proportion.
Transfer the solution into a bottle ready for spraying evenly on contaminated areas.
Allow the solution to effectively become a mold cleaning agent by letting it sit for 5-10 minutes.
Scrub the tarnished area using a small brush and then wipe the area clean.
Try to repeat the process if it is needed.

Remember that ammonia is a very irritating chemical to the eyes and skin. In fact, the fumes emitted by this chemical are pretty toxic in nature. This can also be lethal when ingested or inhaled.

2. Eliminating Black Mold with Bleach

One of the cheap alternatives to killing black mold is through a bleaching agent. As a matter of fact, you can find some mold cleaning agents around food markets, hardware stores, and grocery outlets. The only problem with bleach is the time it takes to treat the root cause of this problem.

Mix one cup of bleach to one gallon of water thoroughly.
Use a spray bottle to pour the mold killing agent into it. Apply this to the affected areas evenly.
You can also use a piece of cloth or sponge to apply the cleaning agent on areas tainted by mold.
Try to use a tiny-bristled scrub to brush off tainted areas. Wipe away the area or use a vacuum to remove the excess.
Simply leave the area without rinsing off the bleach. This will enable the agent to disinfect and continually prevent further mold growth.

Always remember not to mix bleach with ammonia because this is a very dangerous mixture to deal with. This will even produce toxic fumes or vapors that could harm the person when inhaled. Likewise, never mix bleach with vinegar solution. This is because the combination between the two will not provide a better cleaning solution to work with.
At the same time, try to have good ventilation prior to performing these cleaning routines. This will ensure that any possible fumes or vapors can be dispersed accordingly. However, this will be applicable to small projects only, as larger jobs will require negative pressure installed to avoid mold spores to become aerosolized.