Skip to content

Outside Faucet Leaking: Tips for Repairing It

An outdoor or outside faucet leaking may go unnoticed for a while and it may not raise the same concerns as an indoor faucet leaking. True, the outdoor leaks pose less of a threat to your home than indoor leaks but you would still be wasting water and spending more money. Major leaks will pose a risk to your property and indoor fixtures as well if moisture manages to seep into the walls and foundation.

Outside faucet leaking is relatively easier to resolve. The leaks usually happen due to two reasons or at two distinct parts. It would be either the handle or the spout. It could be both. You can tighten the handle by using a wrench. Just work on the packing nut if it is loosened and see if the leak is fixed. Else, you may have to check the valve stem inside the faucet. To check the spout, just remove the valve stem and check if the spout is what’s causing the outside faucet leaking.

In some cases, especially with valve stems that are marketed as front free, the leaks and their causes can be complicated. For instance, the valve stem may be soldered into the supply line. Most stems are screwed in but not frost-free stems. You would need to hire a plumber for such outside faucet leaking problems. Here is a step by step guide to fix an outside faucet leak.

Step 1: Turn the Water Off

You will have the main shut off valve in the crawlspace or in the basement. Turn the faucet on to let the accumulated water in the line drain out. Take a screwdriver, remove the screw that holds the handle and then remove the handle. You will get to the packing nut behind the handle. Take a wrench and turn the packing nut counterclockwise. As you remove the packing nut you will get access to the valve assembly. Pull it out in sliding motion.

Step 2: Remove the Packing Nut

You may find a worn-out washer behind the packing nut. Replacing this may fix the leak. Once you take out the packing nut and the valve stem assembly, check the washer. You would be able to spot if it is damaged beyond functionality. Get a new washer and replace the old one.

Step 3: Unscrew the Washer

Simply unscrew the washer, get an identical new one, place it and screw it back in. Tighten the washer. A loosely installed washer will also cause leaks. Slide the valve assembly back, screw the packing nut, tighten the valve stem and reinstall the handle. Make sure all screws and covers are properly tightened.

Categories

Give us a call!

Or let us contact you!
Please enable JavaScript in your browser to complete this form.
=
Schedule Now
Please enable JavaScript in your browser to complete this form.
=

Americans with Disabilities Act (ADA) Notice

At Rooter Guard, we are committed to ensuring that individuals with disabilities enjoy full access to our websites. In recognition of this commitment, we are in the process of making modifications to increase the accessibility and usability of this website, using the relevant portions of the Web Content Accessibility Guidelines 2.0 (WCAG 2.0) as our standard. Please be aware that our efforts are ongoing. If at any time you have difficulty using this website or with a particular web page or function on this site, please contact us by phone at (818) 572-9743; or email us at ([email protected]) and place “Web Content Accessibility (ADA)” in the subject heading and we will make all reasonable efforts to assist you.