Kohler Shower Valve Leaking and How to Fix It

2. Unscrewing the Handle

There is a set screw that you need to find which secures the handle onto the stem of the cartridge. Take note that Kohler models usually have it underneath the lever of the handle. You can loosen the screw with an Allen wrench by pulling back on the handle in order to remove it.

3. Removing the Adapter

If your shower valve has an adapter, loosen the screw of the adapter by using a screwdriver and slide it off the faucet.

4. Removing the Trim Plate

The trim plate can be removed by unscrewing the screws of the trim plate and lifting it from the shower wall. Loosen and remove a couple of screws in the cartridge collar. This is the housing that is holding the faucet cartridge. Use your screwdriver to do this and take the collar from the faucet. This collar contains the cartridge.

5. Replacing the Collar

You need to replace the collar with one that should come from Kohler itself. You may now tighten the screws of the collar. After that, you can now remove the trim plate and replace it with a product that comes from Kohler. Thus, you can now tighten the screws holding the trim plates. Likewise, you can replace the handle and adapter and you need to tighten the set screw of the handle.

If you think that doing this easy procedure is difficult to implement, then you should seek the assistance of a professional. Otherwise, you can just follow the easy steps and you can save on fees. Just make sure that you have everything you need, particularly the Kohler shower valve and parts, before you begin fixing the faucet leaks. This way, you can perform the procedure without having a hard time following the method on how to fix it.