Shower Diverter Valve Leaking: How to Fix It

2. Seal the Drain Properly

Remember that the shower diverter valve is just on top of the drain on standard tubs. If you are going to handle this problem yourself, try to plug the drain up to avoid dropping small components into it. If you happen to drop these parts accidentally, you can buy some replacement parts before you would seal up the valve once again.

3. Remove the Spout Correctly

Some diverters are located at the back of the pipe and spout of the faucet. If you should access these areas, you have to remove the spout in front of the pipe using a wrench. Make sure you are twisting at the right direction to avoid stripping the base of the spout. The key here is to do the job cautiously and slowly to avoid any mistakes to happen.

4. Find a Replacement Using the Right Model

Some shower diverter valves can be fixed by tightening the screws up behind the plate of the valve. On the other hand, it is required to replace the valve entirely. Although this might be a simple task to do, there is a possibility that you will commit some mistakes.

Therefore, it is important to buy the correct make and model of the shower diverter valve when replacing the old one. You might find other brands to be useful replacements, but tiny variations in function and size can be enough to become the installation failure. If possible, you can seek the assistance of the salesperson from the local plumbing and hardware store. This is important if you are having a hard time figuring out which type of replacement valve needs to be acquired.

If you think that you are having a hard time figuring out what to do when faced with shower diverter valve leaks, then it is best to hire a professional to deal with the matter. However, if you find it a self-fulfilling thing to do, then go ahead and do it yourself. Just don’t hesitate to ask for assistance when you get confused, especially when dealing with important installations.